User Tools

Site Tools


standard_effects_mapping

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
standard_effects_mapping [2018/01/15 09:26]
be.ing
standard_effects_mapping [2018/03/25 07:58] (current)
be.ing
Line 9: Line 9:
   * the enable buttons of the effects in the chain can still be accessed by pressing the parameter buttons with shift, although the enable switches will not be shown on the LEDs until the effect is unfocused.   * the enable buttons of the effects in the chain can still be accessed by pressing the parameter buttons with shift, although the enable switches will not be shown on the LEDs until the effect is unfocused.
  
-The LED of the focus button indicates whether any effect is focused. When its LED is on, you can hold the button down to see which effect is focused without having to look at the computer screen. To unfocus the effect, you can short press the focus button. The focused effect is remembered, so when you short press the focus button again, the previously focused effect will be refocused. Alternatively,​ if you want to keep all the parameters showing on screen, you can press and hold the focus button, then press the button of the focused effect to unfocus it. Showing all the parameters without having an effect focused is helpful for experimenting with different ways of linking parameters to the metaknob.+The LED of the focus button indicates whether any effect is focused. When its LED is on, you can hold the button down to see which effect is focused without having to look at the computer screen. To unfocus the effect, you can short press the focus button. The focused effect is remembered, so when you short press the focus button again, the previously focused effect will be refocused ​(it is not remembered when you shut down Mixxx though). Alternatively,​ if you want to keep all the parameters showing on screen, you can press and hold the focus button, then press the button of the focused effect to unfocus it. Showing all the parameters without having an effect focused is helpful for experimenting with different ways of linking parameters to the metaknob.
  
 When the focus button is pressed with shift, it toggles the EffectUnit between controlling different EffectUnits in Mixxx. Typically this is used to toggle between EffectUnits 1 & 3 or 2 & 4, like deck toggle buttons. When the focus button is pressed with shift, it toggles the EffectUnit between controlling different EffectUnits in Mixxx. Typically this is used to toggle between EffectUnits 1 & 3 or 2 & 4, like deck toggle buttons.
standard_effects_mapping.txt ยท Last modified: 2018/03/25 07:58 by be.ing