User Tools

Site Tools


jbsystems_dj-kontrol_3

This is an old revision of the document!


JB Systems dj-kontrol 3

jb-systems.eu_media_catalog_product_cache_19_image_1600x1600_9df78eab33525d08d6e5fb8d27136e95_3_8_382-1.jpg

This DJ controller includes a 2 channel sound card with balanced XLR outputs (+ unbalanced RCA) and a microphone input. This controller works with USB cable connected only, but for better stability, it's recommend to use the external 5V 1A Poweradapter as well.

Usage

Download the Mapping .zip file from the Forum Thread (above), unzip it and copy the two files (.js / .xml) to your Mixxx controllers folder.

  • Linux: ~/.mixxx/controllers
  • Windows: %USERPROFILE%\Local Settings\Application Data\Mixxx\controllers
  • Mac OS X: ~/Library/Application Support/Mixxx/controllers

Start Mixxx

  • On some Linux systems, Pulseaudio blocks the driver for Mixxx, so you have to start Mixxx via Terminal with:
  • pasuspender mixxx

In Mixxx goto:

  1. Options→Preferences→Sound Hardware:
  • Sound API: ALSA
  • Sample Rate: 48000Hz
  • Output / Master / JB Systems DJ-Kontrol 3: USB Audio / Channels 3 - 4
  • Output / Headphones / JB Systems DJ-Kontrol 3: USB Audio / Channels 1 - 2
  1. Options→Preferences→Controllers:
  • check: Enabled
  • Load Preset for this controller

Now the controller should work with Mixxx!

Mapping

  1. Select Knop
  2. Load to Deck 1
  3. Load to Deck 2
  4. Back
  5. Deck Gain
  6. EQ High
  7. EQ Mid
  8. EQ Low
  9. Deck Volume Fader
  10. Mic Volume
  11. Mic Input
  12. Crossfader
  13. Crossfader Curve Select
  14. CUE Mix
  15. CUE Volume
  16. Headphones Output
  17. CUE Pre-fader listening (Pfl) Deck 1
  18. CUE Pre-fader listening (Pfl) Deck 2
  19. Master (Output) Volume
  20. Set Cue
  21. Cue
  22. Play/Pause
  23. Jogwheel
  24. Scratch
  25. SYNC
  26. Loop In
  27. Loop Out (Exit)
  28. Reloop
  29. 2-Beat Loop
  30. 4-Beat Loop
  31. 8-Beat Loop
  32. Halve Loop
  33. Double Loop
  34. Pitch range
  35. Speed-/Pitch Fader
  36. Pitch Bend +/-
  37. Hot-Cue, delete on shift mode
  38. Shift Mode
  39. Needle Drop Sensor
  40. Key
  41. Effect on/off
  42. Effect select
  43. Effect Parameter 1
  44. Effect Parameter 2
  45. USB Port
  46. RCA unbalanced output
  47. XLR balanced output
  48. Switch between XLR/RCA
  49. external Power-plug port

Jogwheel functions

  • Scratch Mode On: touched on top scratch
  • Scratch Mode On: touched on side pitchbend
  • Scratch Mode Off: always pitchbend
  • Shift Mode On: Loop Move

Special features

  • Parameter 1 Knob is mapped to dry/wet
  • Parameter 1 Shift Knob (Filter) is mapped as Super Knob
  • Parameter 2 Knob is mapped to the first setting of the selected effect
  • Pitch Fader are inverted (up = + , down = -)
  • Shift Btn is mapped as toggle (press to activate, press again to deactivate)
Translations of this page:
jbsystems_dj-kontrol_3.1502716385.txt.gz · Last modified: 2017/08/14 09:13 by tyrann619