User Tools

Site Tools


hercules_p32_dj

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
hercules_p32_dj [2018/03/30 08:01]
be.ing [User configurable options]
hercules_p32_dj [2018/10/25 13:12]
be.ing remove outdated sections for Mixxx 2.0 mapping
Line 31: Line 31:
   ***Browse encoder**: scrolls through library. Pushing toggles big library view. Turning with shift controls the cue/main mix going to the headphone output. Pushing with shift toggles split cue mode (left ear of headphone output plays cue signal, right ear plays main signal).   ***Browse encoder**: scrolls through library. Pushing toggles big library view. Turning with shift controls the cue/main mix going to the headphone output. Pushing with shift toggles split cue mode (left ear of headphone output plays cue signal, right ear plays main signal).
  
-=== Mixxx 2.1 === 
 The mapping of the encoders does not match their labels. They are labeled on the controller symmetrically,​ but they are mapped asymmetrically like the rest of the deck controls: The mapping of the encoders does not match their labels. They are labeled on the controller symmetrically,​ but they are mapped asymmetrically like the rest of the deck controls:
   ***Left encoder**: Turning halves/​doubles the loop size. Turning with shift beatjumps by 1 beat forward/​backward,​ or if a loop is enabled, moves the loop 1 beat forward/​backward. Pushing (de)activates a loop. Pushing with shift reactivates a disabled loop, or if a loop is enabled, jumps to the loop in point and stops the deck.   ***Left encoder**: Turning halves/​doubles the loop size. Turning with shift beatjumps by 1 beat forward/​backward,​ or if a loop is enabled, moves the loop 1 beat forward/​backward. Pushing (de)activates a loop. Pushing with shift reactivates a disabled loop, or if a loop is enabled, jumps to the loop in point and stops the deck.
   ***Right encoder**: Turning adjusts the pitch, or with keylock on, just the tempo. Pushing resets the pitch to the track'​s default. Turning with shift jumps forward/​backwards by the beatjump size. If a loop is enabled, turning with shift moves the loop by the beatjump size. Hold shift, push, and turn to adjust the beatjump size, shown on the LED display on the controller. When the encoder is released, the LED display goes back to showing the loop size.   ***Right encoder**: Turning adjusts the pitch, or with keylock on, just the tempo. Pushing resets the pitch to the track'​s default. Turning with shift jumps forward/​backwards by the beatjump size. If a loop is enabled, turning with shift moves the loop by the beatjump size. Hold shift, push, and turn to adjust the beatjump size, shown on the LED display on the controller. When the encoder is released, the LED display goes back to showing the loop size.
- 
-=== Mixxx 2.0 === 
-  ***Loop/​Tempo encoder**: turning halves/​doubles the loop size. Pushing (de)activates a loop. For loops 1 beat or less, the loop only stays active while the encoder is pushed down. Pressing while holding shift sets a manual loop. The loop start point is set when the encoder is pressed and the loop out point is set when the encoder is released. Turning while holding shift moves the loop. If the loop is 1 beat or larger, it moves the loop by 1 beat; if the loop is smaller than 1 beat, it moves the loop by the size of the loop. 
-  ***Filter/​Move encoder**: Turning adjusts the pitch, or with keylock on, just the tempo. Pushing resets the pitch to the track'​s default. Turning with shift jumps forward/​backward by beats (default 4 beats). Hold shift, push, and turn to select how many beats to jump by, shown on the LED display on the controller. When the encoder is released, the LED display goes back to showing the loop size.  
  
 ==== Effects ==== ==== Effects ====
-=== Mixxx 2.1 === 
 Refer to the [[Standard Effects Mapping]] page for details on how to use the effects sections. Refer to the [[Standard Effects Mapping]] page for details on how to use the effects sections.
  
Line 47: Line 41:
  
 Pressing the headphone button with shift assigns the effect unit on that side to the headphone channel. This is useful for previewing an effect on a playing deck before using it. The headphone (PFL) button must also be pressed on the deck to hear the effect on it in headphones. Pressing the headphone button with shift assigns the effect unit on that side to the headphone channel. This is useful for previewing an effect on a playing deck before using it. The headphone (PFL) button must also be pressed on the deck to hear the effect on it in headphones.
- 
-=== Mixxx 2.0 === 
-The effects controls on the left control Effect Unit 1, the controls on the right control Effect Unit 2. This does not change when decks are toggled between decks 1/3 or 2/4. 
- 
-Press ON/MACRO buttons to activate the Effect Unit on Decks 1-4. 
- 
-Turn the FX AMOUNT knobs to adjust effect parameters. By default, the knobs control the parameters of the first effect in the effect unit. The other effects can be selected with the Slicer pad mode (see below). 
- 
-Turn the Dry/Wet knob to control the mix of the effect sounds with the source deck(s). Shift + Dry/Wet adjusts the super knob for the Effect Unit. 
- 
-Be warned that soft takeover does not work for the effect parameter knobs when switching between effects due to [[https://​bugs.launchpad.net/​mixxx/​+bug/​1479008|a bug in Mixxx]]. Soft take over does work for switching between dry/wet and the superknob though. 
- 
-The Slicer pad mode has additional controls for effects. The top three rows each control an individual effect in the effect unit, allowing you to set up effect chains. (These are not visible in the LateNight skin). The left button toggles whether that effect is enabled (the whole effect unit still has to be enabled for a deck for it to be audible). With shift, the left button resets the effect'​s parameters to their default values. The two purple buttons in the middle scroll through the available effects. The button on the right sets the parameter knobs to control that effect'​s parameters. The bottom row toggles the effect unit on the headphones, master mix, microphone 1, and auxiliary input 1 (from left to right). 
  
 ==== Other controls ==== ==== Other controls ====
hercules_p32_dj.txt ยท Last modified: 2018/10/25 13:14 by be.ing