* Manufacturer's product page
* Manufacturer's support and downloads page
* Forum thread
Whether you’re just getting started DJing or you’ve already refined your skills, you can let your creativity run wild. Enjoy excellent precision and comfort to create your mixes using the circular displays on the jog wheels to guide your movements and perfect your scratches, and have fun with the amazing contactless AIR Control sensor. Your adventure starts right here and now. It’s your turn!
This controller has built-in 4 channel output sound card, with MASTER output (RCA and 3.5mm jack) and HEADPHONE output (6.35mm and 3.5mm jack).
* Open Preferences > Sound Hardware
* Select the Output tab
* From the Master drop-down menu, select the audio interface, then Channels 1-2
* From the Headphones drop-down menu, select the audio interface, then Channels 3-4
* Click Apply to save the changes.
Sync = Sync lock
SHIFT + SYNC = Sync master.
Cue = Cue point
SHIFT + CUE = Return to beginning of loaded song.
Play = Play/Pause
SHIFT + Play = Cue Stutter.
Vinyl = Scratch On/Off (Default: ON)
PADS - Hot Cue:
Set and trigger Hot Cue 1-8
SHIFT + Pad = Delete Hot Cue 1-8.
PADS - Sample:
Trigger Sampler 1-4 (MODE 2 Samples)
Trigger Sampler 5-8 (MODE 4 Sample bank)
Loop X 1/2 = Half loop size
LOOP ON = Loop on/off (when you end looping playback resumes from end of loop).
Loop X 2 = Double loop size.
Loop Encoder (Single mode) = Loop Half/Double size
FX 1-3 on/off
SHIFT + Pad = FX 1-3 Select
AIR FX = Activate AIR Control.
FX Encoder (Single mode) = FX dry/Wet
FX Encoder (Multi mode) = Simultaneous FX 1/2/3 Level FX
AIR Control = LOW Filter
Mic Button = Activate microphone input (in hardware).
Panel Button = Maximize/minimize library
Load/Prepare Button = AutoDJ On/Off
Cue Button = Switch monitor cue level to max.
Mix Button = Switch monitor cue mix to 50%.
Jog wheel LEDs:
White LEDs = Play position
Blue LEDs= Currently not mapped
Other controls as labeled.