* Manufacturer's product page
* Manufacturer's support and downloads page
* Forum thread

This controller is a class compliant USB MIDI and audio device, so it can be used without any special drivers on GNU/Linux, Mac OS X, and Windows. However, if you wish to use the ASIO sound API under Windows, please install the latest driver package available from the Support page.

This controller has built-in 4 channel output sound card, with MASTER output (RCA) and HEADPHONE output (3.5mm jack).

* Open Preferences > Sound Hardware
* Select the Output tab
* From the Master drop-down menu, select the audio interface, then Channels 1-2
* From the Headphones drop-down menu, select the audio interface, then Channels 3-4
* Click Apply to save the changes.

Please refer to the user manual for more details about the audio configuration in Mixxx.

The Master and Headphone knobs, as well as the Master button are hardware controls and interact directly with the integrated sound card's output. Although they also send MIDI messages, they have NOT been mapped in Mixxx, so do not expect an on-screen reaction when using them. This was done to prevent the knobs to adjust both the gain on the controller's sound card and in Mixxx.

Please refer to the user manual in order to learn how to set your levels properly when using Mixxx.

Save both MIDI and script files to your user controller mapping folder, then load the preset as described in the user manual

* Master knob (Hardware control)
* Headphone knob (Hardware control)
* Master buttons (Hardware control)
* Beatmatch guide (Hardware control)

Decks:

Sync = Sync lock
SHIFT + SYNC = Sync master.

Cue = Cue point
SHIFT + CUE = Return to beginning of loaded song.

Play = Play/Pause
SHIFT + Play = Cue Stutter.

Vinyl = Scratch On/Off (Default: ON)

Loop In = Beatloop 4 beats
SHIFT + Loop In = Loop Halve.
Loop Out = Beatloop Off
SHIFT + Loop Out = Loop Double.
Beat Align LED = Track end warning (Make sure Beatmatch Guide is On for this to work)

Browser:

Encoder = Move up/down list
Encoder button = Switch focus between List and file view
SHIFT + Encoder button = Maximize/Minimize browser view
Assistant = AutoDJ On/Off

Be sure a playlist was created for AutoDJ before activating this function

PADS - Hot Cue:

Set and trigger Hot Cue 1-4
SHIFT + Pad = Delete Hot Cue 1-4.

PADS - Roll:

Pad 1-4 = Beatloop 1 / 2 / 4 / 8 beats

PADS - FX :

* When using Firmware v1.68 and earlier, each FX pad will send multiple and different Note and CC messages. As these could not all be used properly with Mixxx current effect framework, a simplified configuration was assigned using the pad in SHIFT mode for convenience.

SHIFT + Pad 1-3 = FX 1-3 on/off
SHIFT + Pad 4 = FX Rack 1/2 On/Off (Deck A/B respectively)

* However, after applying Firmware v1.72, each FX pad now sends a simple Note On/Note Off (as is the case in every other Pad mode). This makes it easier to use the pads to control effect and the latest mapping take advantage of this possibility by removing the use of the SHIFT button.

Pad 1-3 = FX 1-3 on/off
Pad 4 = FX Rack 1/2 On/Off (Deck A/B respectively)

For more details about updating the Firmware.

PADS - Sample:

Trigger Sampler 1-4 (Deck A)
Trigger Sampler 5-8 (Deck B)

Other controls as labeled.